A better way to deal with oil leakage from oil pipe joints is:

      1、Oil tank damage: If an oil leak is found in the oil tank, clean the oil leak and apply soap or gum to the oil leak to temporarily block it. Repairing with epoxy resin adhesive has a better effect;

      2、Rupture of oil pipe: When oil pipe is ruptured, clean the ruptured area, apply soap, wrap cloth or adhesive tape around the ruptured area, tie it tightly with iron wire, and then apply a layer of soap later;

      3、Broken tubing: When tubing is broken, a rubber or plastic tube with a diameter similar to that of the tubing can be used to socket it. If the socket connection is not tight enough, both ends shall be tightly tied with iron wire;

      4、Oil leakage from oil pipe joint: If oil leakage occurs from the engine oil pipe joint, use cotton yarn to wrap around the lower edge of the "horn", and then tighten the oil pipe nut and the oil pipe joint;

      5、Sudden leakage of the radiator: You can repair it with soap or rice and 502 glue. The specific method is to soften the soap with water, pinch it into a plasticine shape with your hand, press it into the leaking part of the water tank, and press the heat sink to temporarily stop the leakage. The rice is softened by hand and then pressed into the leaking part of the water tank.

Specification of oil pipe joint

     Manufacturer of quick connectors: Various connector specifications for high pressure oil pipes include: A type, B type, C type, D type, 90 ° and 45 ° elbows, H type and, cone sealing type, welded connectors, various male, British, and American nuts, pairs, single wires, external wires, tees, right angles, square angles, and flange connections.

Quick connector manufacturer: tubing connector classification

      1、Hydraulic oil pipe: Whether it refers to a high-pressure rubber hose assembly, including rubber type (steel wire weaving, steel wire winding), metal hose, low-pressure PU pipe, etc.

      2、Joints: welding type, ferrule type, flared type, etc.

Quick connector manufacturer: oil pipe connector model

      1、Oil pipes are divided into seamless steel pipes, slotted steel pipes, oil resistant rubber pipes, copper pipes, nylon pipes, and plastic pipes.

      2、Pipe joints are generally divided into flared pipe joints, welded pipe joints, ferrule type pipe joints, compression type pipe joints, removable pipe joints, telescopic pipe joints, and quick couplings.